Speaker System

Speaker System
Click to enlarge
Availability: Pre-Order
Model: FULL 612
Manufacturer: Montarbo
Average Rating: Not Rated

FULL 612-Stereo 3-way Active Speaker System


FULL612 is a very high quality ‘plug & play’ system featuring an exceptional power-to-size ratio, which makes it very easy to transport and install. What differentiates the FULL 612 from similar systems available on the market is the designer’s selection of high quality drivers, usually featured in larger systems. The geometric shape of the cabinets and the bass-reflex ports have been carefully designed to reduce power-compression and turbulence. 
The bass cabinet, FULL 12 is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker management processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of the power output and the temperature (both internal and external) of the amplifier. It also includes a dedicated standby function which results in reduced power consumption when no signal is present. 5 presets are available, one of which may be customized by the user, thus adapting the speaker’s acoustic response to the user’s personal taste. 
The presets can be modified by means of the Montarbo proprietary software program RAConLSTM supplied with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter ‘fully parametric’ equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier’s condition.


• Stereo 3-way active speaker system composed of 2 passive satellites and an active bass cabinet.

• 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2000 Watts EIAJ (1000 W for the bass cabinet, 500 + 500 W for the satellites).

• FULL 12: 130 dB max SPL half-space. FULL 6: 125 dB max SPL.

• FULL 12 bass cabinet: 12” woofer (4” voce coil) with a ventilated, shielded neodymium magnet.

• FULL 6 satellite: 6” woofer (2.5” voice coil) with a ventilated, shielded neodymium magnet; HF driver, with 1” throat and 1.5 “ voice coil, featuring a neodymium magnet and titanium diaphragm; 
wide dispersion (80° H x 60° V) wave-guide horn.

• Montarbo 56 bit DSP, 180 MHz, 24 bit converters.

• Dedicated standby function.

• 5 presets one of which may be customized and loaded into the DSP.

• Presets remote control and customization by means of the proprietary software program RAConLSTM and the optional LD2.4 USB interface.

• With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.

• Birch plywood cabinet, finished with anti-abrasion paint.

• Speaker stand adapter; transport handles.



Enclosures FULL 6: 2-way vented bass reflex         
FULL 12: vented bass-reflex        
Components custom designed on Montarbo specifications
FULL 6 (passive sat. x 2) 1 x 6” woofer (2,5” voice coil) with shielded ventilated neodymium magnet
1 x compression driver (1” throath, 2.5” voice coil) fitted to an elliptical tractrix high dispersion wave guide horn (80° H x 70° V)
FULL 12 (bass unit) 1 x 12” woofer (4” voice coil) with shielded ventilated neodymium magnet
Frequency response 40 - 20.000 Hz (of complete system)
max SPL (peak) FULL 6: 125 dB  
FULL 12: 130 dB half-space
Electronic cross-over 100 Hz / passive 1800 Hz
Amplifier 3 class D power units contained in the FULL12 cabinet
LF output power 1 x 1000 W
MHF left output power 1 x 500 W
MHF right output power 1 x 500 W
Total output power 2000 W  EIAJ 
DSP Montarbo - contained in the FULL12 cabinet
Processing 56 bit / 180 MHz
Conversion 24 bit
Managements functions Filtering, equalizer, delay, limiting        
diagnostic (amplifier power control, amplifier temperature control external temperature control)
5 presets, 1 of which is custom-programmable
Remote control by PC (of up to 10 systems)
Connections and controls FULL 12 
4-pole Speakon® connector for the connection to the satellite (FULL6)
balanced XLR connectors for the L/R inputs and L/R link
Volume control
Status Led indicators (signal, clipping, thermal warning protection) 
Active preset LED indicators
RJ45 DATA connectors for the two RS485FD serial interfaces for the connection to a PC (Montarbo net)
PowerCon® connectors for mains power supply (input + link)
FULL 6 satellite
4-pole Speakon® for the connection to the FULL 12 subwoofer
Construction Birch plywood, high-impact, chip-resistant paint, steel protection grill with foam protection on FULL 12
Fittings Carrying  handles 
Speaker-stand adapter                
Dimensions / Weight FULL 12 
W 512 x H 376 x D 476 mm / 24.5 kg         
FULL 6 satellite
W 210 x H 333 x D 208 mm / 7.4 kg
Write Review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Speaker System
Click to enlarge
Speaker System
Click to enlarge