Speaker System

Speaker System
Click to enlarge
Availability: Pre-Order
Model: W24As
Manufacturer: Montarbo
Average Rating: Not Rated

W24As - 2 Way Active Bi-Amplified Speaker System


Designed to provide outstanding sound performance in the most diverse situations, W24As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product. 
The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

• Typical features of much bulkier, heavier systems: high sound pressure levels, response extended to the extremes of the range, 
very low distortion, cleanness of the medium range, high dynamics.

• 134 dB max SPL.

• 2 class AB MosFet power amplifiers deliver a total output power of 1050 W (LF 800 W, HF 250 W).

•  2 indipendent dedicated dynamic processors

• Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).

• 2 x 12” woofers, 3” voice coil, with lightweight neodymium magnet assemblies.

• 2” neodymium compression driver - with titanium diaphragm and 
a 3” voice coil.

• 60° x 40° constant directivity horn.

• Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

• W24As may be flown using industry standard flying hardware. 
It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

• Stand adapter; ergonomically designed side handles for easy transportation and set-up.



• Suitable for the most demanding professional requirements in the most diverse situations, for both indoor and outdoor use.

• Stadiums, arenas

• Concert halls

• Medium-to-large theatres

• Medium-to-large night clubs

• Large-scale events



Enclosure 2 way bass-reflex
Frequency response 50Hz ÷ 20kHz
Sensitivity (1W,1m) 103 dB
Max SPL 134 dB
Components (custom) 2 x 12" neodymium magnet high efficiency woofers 
2" neodymium dynamic driver coupled to a constant directivity horn (60°H x 40°V)
Electronic crossover 1000 Hz, 24dB/Oct (Linkwitz-Riley)
Construction High grade phenyl-glued multiply birch
Internal steel braces
Slide guides for standard anchor ring
Recessed rings for the inclination adjustment
Powder painted steel protection grille
Side handles
Stand adapter
Amplifier 2 MosFet, class AB, amps controlled by 
2 independent active dynamic processors
Forced cooling (low turbolence fan)
Max. output power 800 + 250 W 
Bass: 800 W (4 ohms/0,1% THD) 
Mid/High: 250 W (8 ohms/0,1% THD)
Connections Balanced XLR input and output (link) wired in parallel
Mains power connector Neutrik PowerCon®
Dimensions (WxHxD) 41.4 x 94.3 x 36.8 cm
Weight 42.5 kg
Write Review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Speaker System
Click to enlarge
Speaker System
Click to enlarge
Speaker System
Click to enlarge